Payment & Shipping Terms:
|Mesh Type:||In Roll Mesh||Wire Diameter:||2.5--5.0mm|
|Width Of Mesh:||2400mm||Mesh Opening:||100x100mm--300x300mm(adjustable)|
|Length Of Mesh:||60m||Capacity:||300m Per Hour|
|Longitude Wire Type:||From Coil Wire||Cross Wire Type:||Pre-cut|
wire mesh roll welding machine,
steel wire mesh machine
Automatic Welded Mesh Welding Equipment For In Roll Mesh Type
1 The control system adopts synchronous CNC technology,Mitsubishi PLC program and HMI. It is easy and convenient to operate with the touching screen.
2 The fallen wire system is controlled by stepping motor instead of putting wefts wires by manual work, increasing productivity.
3 Adjustable distance of line wire that allows different opening size between the line wire, when input the distance of cross wire to control cabinet by touch screen, any mesh opening can be reach. Welding aperture can adjust randomly within range.
4 The length of mesh can be adjustable in the control cabinet. Such as you need produce length of mesh 50m in roll. mesh size 10*10cm. So input quantity of mesh opening 50 into the control cabinet by touch screen.The machine will produce length of mesh 50m in roll.
5 This machine equips typical and efficient transformer, which gearless adjusted, enlarging the welding range.
6 Mesh pulling system is controlled by servo motor.
7 Welding transformer:160KVA*3(24 welding heads) ——every 8 welding heads need a water cooling transformer.
8 Wire feeding way:The line wires from coil wire. and cross wires should be pre-straighten and pre-cut.
9 Material: Suitable for low carbon iron wire,black annealed wire, cold galvanized wire, hot galvanized wire.
|Wire diameter||2.5--5.0mm||Line wire form||From coil|
|Line wire distance||100--300mm||Weft wire form||Pre-cut wire|
|Cross wire distance||100--300mm||Rated voltage||380V 50HZ|
|Welding mesh width||Max 2400mm||Transformer power||3X160KVA|
|Welding speed||45--60 times/min||Length of mesh||80m in roll|
|Machine weight||4.3T||Motor power||4.0KW|
Contact Person: Jack Zhang