Payment & Shipping Terms:
|Motor:||4.0KW 2.2KW||Wire Diameter:||0.4--2.5mm|
|Primary Voltage:||220V 380V 440V 415V||Usage:||Welded Wire Mesh In Roll|
|Mesh Width:||1.2--2.5m||Mesh Size:||1/2inch 1inch 2inches 3inches 4inches|
wire cage welding machine,
wire mesh spot welding machine
Full Automatic Electric Welded Wire Mesh Machine Made in Anping
1. It has advantages such as reasonable design, easy operation, low noise, high stability, low cost, high productivity, firm welding points, welding uniformity and good surface.
2. When the mesh is welding, the rolling mesh machine is also working to roll mesh together. You can put the mesh length number into control cabinet.
3. The hole size is adjustable and precise and the mesh width and length can be adjustable according to customer’s requirements on the control cabinet.
4. This equipment is mechanical-electrical integrative welding machine.
5. The machine can straighten and send cross wire automatically, weld mesh automatically, cut edge automatically, roll mesh automatically.while welding mesh working,the rolling mesh also work together.
6. Material:Suitable for, carbon steel wire, or galvanized (cold galvanized, hot galvanized) processing.
12.5mm 25mm 50 mm
25mm 50mm 75mm 100mm
|1.2m 1.5m 1.8m 2m||1.2m-2.5m|
|Welding speed||Max .75rows/min||Max .180 rows/min||Max . 180rows/min|
1. This machine can weld 0.4-2.5mm ,the raw material can be black wire , galvanized wire , stainless steel wire.
2. For the wire feeding ,both longitude wire and cross wire are feed automatically from wire coils
3. The edge cutter and middle cutter can adjust freely , So you can get regular edge and 2 or 3 rolls mesh at the same time
4. You can set the mesh roll length by counter switch on the control panel
5. Both welding time and welding current is adjustble on control panel to adjust the welding degree.
Contact Person: Jack Zhang