Payment & Shipping Terms:
|Width Of Mesh Panel:||Max 3000mm||Mesh Opening:||50x50mm--300x300mm|
|Length Of Mesh Panel:||As Per Required||Welding Transformer:||125KVA*8PCS|
|Servo Motor:||3.8KW||Line Wire:||Pre-cut|
chicken mesh making machine,
automatic wire mesh machine
PLC Panasonic Steel Grid Welding Machine For Width of Mesh 3000mm
1. The control system adopts synchronous CNC technology, Panasonic PLC program and HMI. The machine operation is more intelligent and reasonable.
2. Control cabinet adopt touch screen operate system, you can change welding time and mesh opening size through touch screen. And has language in English.
3. The cross wires are fed from the hopper device automatically and is controlled by step motor.
4. Adjustable distance of line wire that allows different opening size between the line wire, when input the distance of cross wire to computer, any mesh opening can be reach. Welding aperture can adjust randomly within range.
5. The main engine adopts imported and famous pneumatic components, making the service life long.
6. The machine eqiops a ladder which the worker can put the cross wire into the hopper device.
7. Mesh drawing system is controlled by Panasonic servo-motor that adopts elastic tension and opening positioning mesh, which improves the precision of mesh opening size.
8,The machine equips with 8 pieces of typical and efficient water-cooling transformers, 125KVA*8(32pcs of water cooling electrodes) ——every 4 welding heads need a water cooling transformer.
9. Wire feeding way:The longitudinal wires and cross wires should be pre-straightened and pre-cut. The longitudinal wires should be inserted into the slot tunnel by manual work or inserted into the wire feeding car first, then send by Panasonic servo motor.
10, Material:Suitable for low carbon iron wire, deformed bar, galvanized wire.
|Wire diameter||3.0--6.0mm||Line wire form||Pre-cut wire|
|Line wire distance||50--300mm(adjustable)||Weft wire form||Pre-cut wire|
|Cross wire distance||50--300mm(adjustable)||Rated voltage||380V 50HZ|
|Welding net width||3000mm||Welding transformer||125KVAx8PCS|
|Welding speed||45--60 times/min||Panel mesh Length||Max 6m|
|Welding spots||32||Overall dimension||9.5m*3.2m*2.1m(L*W*H)|
|Machine weight||3.9T||Motor power||7.5 KW|
|Workshop||16m*5m*4m(L*W*H)||Power supply||at least 120KVA|
Linear wire feeding
1. A device for feeding a linear wire.
2. Transformer: 8 * 125KVA (Water-cooling)
3. Welding time and welding current are regulated separately. It is easy to establish when the diameter of the wire is changed.
Cross wire feed
1. Transverse wires, pre-straightened and cut
2. The cross-wires controlled by the stepper motor are fed automatically.
1. Special copper with a long service life and high conductivity
2. Welding electrodes: 32 pcs.
3. The pitch of the wire line is 50-300 mm
Stretching the grid
1. The pitch of the transverse wire is set via the PLC
2. The cell size may vary from 50 mm to 300 mm.
3. The maximum length of the grid is 6 m.
Contact Person: Jack Zhang